1、1.Zheng K, Hu H, Cao D, et al. Experimental and numerical studies on the tensile behaviors of thin-ply and thick-ply open-hole laminates. Thin-Walled Structures 2023;186:110649.(SCI, JCR Q1)
2、2.Zheng K, Cao D, Hu H, et al. Comprehensive investigation on modelling of low-velocity impact damage response of composite laminates − Experimental correlation and assessment. Composite Structures 2024;345. (SCI, JCR Q1)
3、3.Zheng K, Yan X, Zhang Y, et al. Effect of support boundaries on impact response and residual properties of thick-ply and hybrid laminates. Polymer Composites 2025: pc.70676. (SCI, JCR Q1)
4、4.Zheng K, Chen H, Zhang Y, et al. Mechanical behaviors and damage mechanisms of hybrid laminates under low velocity impact and compression after impact loading. Polymer Composites 2025: pc.70619. (SCI, JCR Q1)
5、5.Zheng K, Hu H, Yan X, et al. Quantitative Evaluation of Ply-level Hybridization on Impact Damage Resistance and Damage Characteristics of Laminated Composites. Polymer Composites 2026. pc.70874. (SCI, JCR Q1)
6、6.Zheng K, Cao D, Hu H, et al. Mechanical Properties of Thin-Ply Composites Based on Acoustic Emission Technology. Materials 2021;14. (SCI, JCR Q1)
7、7.Zheng K, Li S, Ji Y, et al. Interlaminar properties and low-velocity impact/post-impact responses of glass fiber composites with polysiloxane-modified epoxy resin. Advanced Composite Materials 2025:1–16. (SCI, JCR Q3)
8、8.Huo G, Zhang Y, Han X, et al. Hydrogen permeation behavior of locally reinforced type IV hydrogen storage vessels, Polymers 2026: 18: 230. (SCI, JCR Q1,通讯作者)
9、9.Chen H, Liu H, Zhu J, et al. Wrinkling Control During Deep Draping of Dry Fiber Fabrics: An Effective Numerical-Optimization Approach. Polymer Composites 2026. (SCI, JCR Q1,通讯作者)
10、10.Chen H, Liu H, Rui Q, et al. Structural feature based efficient local reinforcement design with robot-assisted fabrication of type IV hydrogen composite pressure vessels. International Journal of Hydrogen Energy 2026. (SCI, JCR Q1,通讯作者)
11、11.Yan X, Zheng K, Wang Z, et al. Fatigue damage quantification in CFRP pantograph frames via embedded fiber optic network, Measurement 2026; 270: 120844. (SCI, JCR Q1)
12、12. Li R, Zheng K, Yan X, et al. Multi-objective optimization of the dry towpreg filament winding process for carbon/epoxy type IV hydrogen storage vessels, Polymers 2026; 18: 639. (SCI, JCR Q1)
13、13.Cai W, Zhu L, Zheng K, et al. Experimental and analytical investigations on single and repetitive impact failure responses of composite sandwich panels with orthogonal woven GFRP facesheets and PVC foam cores. International Journal of Impact Engineering 2024;194:105064.(SCI, JCR Q1)
14、14.Li R, Hu H, Zheng K, et al. A novel embedded optical fibre sensors network and integration strategy for in-situ monitoring of hydrogen storage 70 MPa type IV composite pressure vessels. International Journal of Hydrogen Energy 2026. (SCI, JCR Q1)
15、15.Cao D, Shao L, Hu H, et al. An analytical method for determining mode I initiation fracture toughness in multidirectional composite laminates: Interlaminar fiber ply angle effects. Theoretical and Applied Fracture Mechanics 2025;139:105079.(SCI, JCR Q1)
16、16.Wang X, Ji Y, Hu H, et al. Modeling progressive damage and failure of single-lap thin ply-laminated composite-bolted joint using LaRC failure criterion[J]. Materials, 2022, 15(22): (SCI, JCR Q1)
17、17.Ji Y, Liu Z, Zheng K, et al. Effects of interface adhesive and resin cohesive strength on tensile strength of resin sand based on numerical analysis[J]. China Foundry, 2019, 16(6):406-413. (SCI, JCR Q3)